SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay

Menu

Promotion

Fixed Terminal Block

Fixed Terminal Block

TB Series Terminal Block is Panel Mounted Terminal Block, the spec is 600V, 15A / 25A / 35A with 3 / 4 / 6 / 12 Pole.

More
Ceramic Terminal Block

Ceramic Terminal Block

Ceramic Terminal Blocks are designed for wiring connection in high temperature condition. Spec: 15A / 20A / 50A / 65A.

More

Shining E&E SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay Service Introduction

SHINING E&E INDUSTRIAL CO., LTD is Taiwan SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay supplier and manufacturer with more than 35 years experence. Since 1978, in the Power Distribution Industry, Shining E&E has been offering our customers high quality SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay production service. With both advanced technology and 35 years experience, Shining E&E always make sure to meet each customer's demand.


SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay

SSR-S10DA-H

Item number: SSR-S10DA-H
Load Current: 10A
Input Voltage: 4~32VDC (Control)
Output Voltage: 90~480VAC
Size: 57.0*42.0*24.0mm (L*W*H)
Control method: Zero Cross
Certificate: CE, UL/cUL

SSR, SS Relay, SSR Relay, Single Phase SSR, 10A SSR

SSR perform the same job as Mechanical Relays, but have the following advantages:

1. SSR produce less electromagnetic interference than mechanical relays during operation. This is mostly due to the absence of a phenomenon called contact arcing only present in mechanical relays, where the physical contacts of the relay tend to spark internally while switching. The reduced interference can also be attributed to the fact that SSRs do not use electromagnets to switch.

2. The switch contacts of a mechanical relay will eventually wear down from arcing. An SSR will have a longer life because its internals are purely digital. Properly used, they will last for millions of cycles.

3. SSR turn on and off faster than mechanical relays (≈1ms compared to ≈10ms).

4. SSR are less susceptible to physical vibrations than mechanical relays.

5. Since the switch inside an SSR isn't a mechanical switch, it does not suffer from contact bounce and operates silently.

SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay

Gerneral Product Information
Item number:SSR-S10DA-H
Max. Load Current:10A
Input Operating Voltage:4~32 VDC
Output Load Voltage Range:90~480 VDC
Dimension:57.0 x 42.0 x 24.0 mm (L x W x H)

Spec
Item No.Load Current

Input Voltage

(Control)

Output VoltageControl Method
SSR-S10DA10A4~32VDC
24~280VAC
Zero Cross
SSR-S25DA25A
SSR-S40DA40A
SSR-S10DA-H10A90~480VAC
SSR-S25DA-H25A
SSR-S40DA-H40A

Product Photos

 SSR-S10DA-H DC to AC 10A 480VAC Single Phase Solid State Relay

Product Features

Part Number: SSR-S10DA-H

Load Current: 10A

Input (Control) Voltage: 4~32VDC

Output Voltage: 90~480VAC

Certificate: CE, UL, cUL approved

Optional Part: Proteceive Cover (SSR-S-CV) / Heat Sink (HS-60050 / HS-60100 / HS-60150 / HS-60200)

Shorter switch time than electromechanical relay's.

Longer Lifetime, as there are no switching contacts that will physically wear out.

High-speed & high-frequency switching operations.

.It generates little noise comparing to mechanical relays.

No spark is generated during switching.

Zero crossing control methods.

LED input status indicator.

Single Phase SSR DrawingSSR-S10DASSR-S25DASSR-S40DA
Item No.SSR-S10DASSR-S25DASSR-S40DA
Specifications/Dimensions
L x W x H57 x 42 x 24 mm
Ref.  L1 x W143.8 x 27.0 mm
Ref.  L2 x W246.3 x 12.0 mm
Ref.  Diameter (Ø)5 mm
Electrical Specifications
Max. Load Current10A25A40A
Control MethodZero Cross
Input Operating Voltage4~32 VDC
Input Current20mA @ 32 VDC
Must Turn Off Voltage0~2.5 VDC
Output Load Voltage Range24~280 VAC
Max. One Circle Peak Surge120A250A400A
Min. Blocking Voltage600V
Turn On & Turn off Time<1/2 AC circle
Isolate Impedance50 MΩ / 500 VDC
Max. On-State Voltage Drop1.6 V / 25℃
Materials
Body MaterialsPBT
ColorWhite
Accessories & Parts
Protective CoverSSR-S-CV (Optional)
Heat SinkHS-60XXX series (HS-60050 / HS-60100 / HS-60150 / HS-60200)
Approval & CertificateUL/cUL File No. E301692, CE, LVD

Single Phase SSR DrawingSSR-S10DA-HSSR-S25DA-HSSR-S40DA-H
Item No.SSR-S10DA-HSSR-S25DA-HSSR-S40DA-H
Specifications/Dimensions
L x W x H57 x 42 x 24 mm
Ref.  L1 x W143.8 x 27.0 mm
Ref.  L2 x W246.3 x 12.0 mm
Ref.  Diameter (Ø)5 mm
Electrical Specifications
Max. Load Current10A25A40A
Control MethodZero Cross
Input Operating Voltage4~32 VDC
Input Current20mA @ 32 VDC
Must Turn Off Voltage0~2.5 VDC
Output Load Voltage Range90~480 VAC
Max. One Circle Peak Surge120A250A400A
Min. Blocking Voltage600V
Turn On & Turn off Time<1/2 AC circle
Isolate Impedance50 MΩ / 500 VDC
Max. On-State Voltage Drop1.6 V / 25℃
Materials
Body MaterialsPBT
ColorWhite
Accessories & Parts
Protective CoverSSR-S-CV (Optional)
Heat SinkHS-60XXX series (HS-60050 / HS-60100 / HS-60150 / HS-60200)
Approval & CertificateUL/cUL File No. E301692, CE, LVD

Packaging
100pcs/ctn, N.W. :11.6kgs /carton

Shipping information
1. For small quantity, shipment is prefered to shipping with express by UPS, DHL, EMS, TNT or FedEx to meet your deadline on time worldwide basis.

2. For regular mass production, shipments can be arranged by air-shipping, sea-shipping or express. Let us know on your requirement we will try to save your budget and meet deadline.

Express

Shipping