Menu

Promotion

Fixed Terminal Block

Fixed Terminal Block

TB Series Terminal Block is Panel Mounted Terminal Block, the spec is 600V, 15A / 25A / 35A with 3 / 4 / 6 / 12 Pole.

More
Ceramic Terminal Block

Ceramic Terminal Block

Ceramic Terminal Blocks are designed for wiring connection in high temperature condition. Spec: 15A / 20A / 50A / 65A.

More

SSR-S25VA VR to AC 25A 280VAC Single Phase Solid State Relay | TERMINAL BLOCKS' SOLUTION

Based in Taiwan since 1978, SHINING E&E INDUSTRIAL CO., LTD has been a manufacturer of electrical terminal blocks and barrier strip connectors manufacturer. Since 1978, in the Power Distribution Industry, Shining E&E has been offering our customers high quality SSR-S25VA VR to AC 25A 280VAC Single Phase Solid State Relay production service. With both advanced technology and 45 years experience, Shining E&E always make sure to meet each customer's demand.


SSR-S25VA VR to AC 25A 280VAC Single Phase Solid State Relay

SSR-S25VA

SHINING E&E has 40 years of experience in offering customers VR to AC 25A 280VAC Single Phase Solid State Relay, and ensuring to meet each customer's requirements.

SSR, SS Relay, SSR Relay, Single Phase SSR, 25A SSR

SSR perform the same job as Mechanical Relays, but have the following advantages:

1. SSR produce less electromagnetic interference than mechanical relays during operation. This is mostly due to the absence of a phenomenon called contact arcing only present in mechanical relays, where the physical contacts of the relay tend to spark internally while switching. The reduced interference can also be attributed to the fact that SSRs do not use electromagnets to switch.

2. The switch contacts of a mechanical relay will eventually wear down from arcing. An SSR will have a longer life because its internals are purely digital. Properly used, they will last for millions of cycles.

3. SSR turn on and off faster than mechanical relays (≈1ms compared to ≈10ms).

4. SSR are less susceptible to physical vibrations than mechanical relays.

5. Since the switch inside an SSR isn't a mechanical switch, it does not suffer from contact bounce and operates silently.

SSR-S25VA VR to AC 25A 280VAC Single Phase Solid State Relay

Gerneral Product Information
Item number: SSR-S25VA
Max. Load Current: 25A
Input Operating Voltage:

250 KΩ@ 110 V (Potentiometer: RV-001A)

500 KΩ@ 220 V (Potentiometer: RV-002A)

Output Load Voltage Range:

24~280 VAC

Dimension: 57.0 x 42.0 x 24.0 mm (L x W x H)

Spec
Item No. Load Current

Input Voltage

(Control)

Output Voltage Control Method
SSR-S10VA 10A

250 KΩ@ 110 V

500 KΩ@ 220 V


24~280 VAC

Phase (Angle) Control
SSR-S25VA 25A
SSR-S40VA 40A
SSR-S10VA-H 10A

500 KΩ@ 220 V

1000 KΩ@ 380 V

90~480 VAC

SSR-S25VA-H 25A
SSR-S40VA-H 40A

Product Photos

 SSR-S25VA VR to AC 25A 280VAC Single Phase Solid State Relay

Product Features

Part Number: SSR-S25VA

Load Current: 25A

Input (Control) Voltage: 250 KΩ@ 110 V (Potentiometer: RV-001A) / 500 KΩ@ 220 V (Potentiometer: RV-002A)

Output Voltage: 24~280VAC

Optional Part: Proteceive Cover (SSR-S-CV) / Heat Sink (HS-60050 / HS-60100 / HS-60150 / HS-60200) / Potentiometer (RV-001A / RV-002A)

Shorter switch time than electromechanical relay's.

Longer Lifetime, as there are no switching contacts that will physically wear out.

High-speed & high-frequency switching operations.

.It generates little noise comparing to mechanical relays.

No spark is generated during switching.

Phase (Angle) Control control methods.

LED input status indicator.

Single Phase SSR Drawing SSR-S10VA SSR-S25VA SSR-S40VA
Item No. SSR-S10VA SSR-S25VA SSR-S40VA
Specifications/Dimensions
L x W x H 57 x 42 x 24 mm
Ref.  L1 x W1 43.8 x 27.0 mm
Ref.  L2 x W2 46.3 x 12.0 mm
Ref.  Diameter (Ø) 5 mm
Electrical Specifications
Max. Load Current 10A 25A 40A
Control Method Phase Control
Input Operating Voltage 250 KΩ@ 110 V, 500 KΩ@ 220 V
Input Current N/A
Must Turn Off Voltage N/A
Output Load Voltage Range 24~280 VAC
Max. One Circle Peak Surge 120A 250A 400A
Min. Blocking Voltage 600V
Turn On & Turn off Time <1/2 AC circle
Isolate Impedance 50 MΩ / 500 VDC
Max. On-State Voltage Drop 1.6 V / 25℃
Materials
Body Materials PBT
Color White
Accessories & Parts
Protective Cover SSR-S-CV (Optional)
Heat Sink HS-60XXX series (HS-60050, HS-60100, HS-60150, HS-60200)
Approval & Certificate CE

Single Phase SSR Drawing SSR-S10VA-H SSR-S25VA-H SSR-S40VA-H
Item No. SSR-S10VA-H SSR-S25VA-H SSR-S40VA-H
Specifications/Dimensions
L x W x H 57 x 42 x 24 mm
Ref.  L1 x W1 43.8 x 27.0 mm
Ref.  L2 x W2 46.3 x 12.0 mm
Ref.  Diameter (Ø) 5 mm
Electrical Specifications
Max. Load Current 10A 25A 40A
Control Method Phase Control
Input Operating Voltage 500 KΩ@ 220 V, 1000 KΩ@ 380 V
Input Current N/A
Must Turn Off Voltage N/A
Output Load Voltage Range 90~480 VAC
Max. One Circle Peak Surge 120A 250A 400A
Min. Blocking Voltage 600V
Turn On & Turn off Time <1/2 AC circle
Isolate Impedance 50 MΩ / 500 VDC
Max. On-State Voltage Drop 1.6 V / 25℃
Materials
Body Materials PBT
Color White
Accessories & Parts
Protective Cover SSR-S-CV (Optional)
Heat Sink HS-60XXX series (HS-60050, HS-60100, HS-60150, HS-60200)
Approval & Certificate CE

Packaging
100pcs/ctn, N.W. :11.6kgs /carton

Shipping information
1. For small quantity, shipment is prefered to shipping with express by UPS, DHL, EMS, TNT or FedEx to meet your deadline on time worldwide basis.

2. For regular mass production, shipments can be arranged by air-shipping, sea-shipping or express. Let us know on your requirement we will try to save your budget and meet deadline.

Express

Shipping