Our main products include various Din Rail for our Terminal Blocks, Fuse Holder, and Fuse Block ,such as Aluminum Din Rail, Steel Din Rail, 25mm Din Rail, and 35mm Din Rail

SHINING holds in stock a range of Plain Din-Rail and slotted Din-Rail Generally supplied in 1m and 2m lengths, this selection table shows a variety of sizes which are available for immediate delivery.

Nowadays most controls components are mounted on standard 35mm Din Rail which is in turn mounted on Control Panel Backplates. When using DIN Rail as a Ground Terminal Block, particular attention must be paid to the short circuit properties of the rail. With the use of a DIN rail ground (protective conductor) terminal block, the DIN Rail itself can be used as the Grounding Terminal Block. The following is an example of how the system works to create a path to ground.

The Ground Terminal Block has a metal foot that bits into the DIN Rail, the rail is fastened to the enclosure, and the enclosure is connected to earth ground. This system allows all control components and their ground requirements to be placed on the same rail and in the same location (a separate ground busbar is no longer required). The benefits of this include reducing installation costs, saving panel space and allowing for quick and easy trouble shooting.

TA-001A: Plain Type 35mm Aluminum Din Mounting Rail. Length: 1M / 2M. Spec: 35 / 7.5mm

TA-001S: Plain Type 35mm Steel Din Mounting Rail. Length: 1M / 2M. Spec: 35 / 7.5mm

TS-001: Slotted Type 25mm Sluminum Din Mounting Rail. Length: 1M. Suitable for TS Series Terminal Block Only